local-test-sqlite3-delta-03/afc-sqlite3/ext/session/sessionat.test

# 2017 February 04
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#
# Tests for the sessions module. Specifically, that a changeset can
# be applied after ALTER TABLE ADD COLUMN has been used to add 
# columns to tables.
#

if {![info exists testdir]} {
  set testdir [file join [file dirname [info script]] .. .. test]
} 
source [file join [file dirname [info script]] session_common.tcl]
source $testdir/tester.tcl
ifcapable !session {finish_test; return}
set testprefix sessionat

# If SQLITE_OMIT_ALTERTABLE is defined, omit this file.
ifcapable !altertable {
  finish_test
  return
}

db close
sqlite3_shutdown
test_sqlite3_log log
proc log {code msg} { lappend ::log $code $msg }

proc reset_test {} {
  catch { db  close }
  catch { db2 close }
  forcedelete test.db test.db2
  sqlite3 db test.db
  sqlite3 db2 test.db2
}


# Run all tests in this file twice. Once with "WITHOUT ROWID", and once
# with regular rowid tables.
#
# ?.1.*: Test that PK inconsistencies are detected if one or more of the PK
#        columns are not present in the changeset.
#
# ?.2.*: Test that it is not possible to apply a changeset with N columns
#        to a db with fewer than N columns.
#
# ?.3.*: Test some INSERT, UPDATE and DELETE operations that do not
#        require conflict handling.
#
# ?.4.*: Test some INSERT, UPDATE and DELETE operations that do require 
#        conflict handling.
#
# ?.5.*: Test that attempting to concat two changesets with different
#        numbers of columns for the same table is an error.
#
foreach {tn trailing} {
  sessionat-ipk ""
  sessionat-wor " WITHOUT ROWID "
} {
eval [string map [list %WR% $trailing] {
  reset_test

  #-----------------------------------------------------------------------
  do_execsql_test $tn.1.0 {
    CREATE TABLE t1(a, b, PRIMARY KEY(a)) %WR%;
  }
  do_execsql_test -db db2 $tn.1.1 {
    CREATE TABLE t1(a, b, c, PRIMARY KEY(a, c)) %WR%;
  }
  do_test $tn.1.2 {
    set ::log {}
    do_then_apply_sql { INSERT INTO t1 VALUES('one', 'two') }
    set ::log
  } [list \
    SQLITE_SCHEMA {sqlite3changeset_apply(): primary key mismatch for table t1}
  ]
  do_execsql_test $tn.1.3 { SELECT * FROM t1 } {one two}
  do_execsql_test -db db2 $tn.1.4 { SELECT * FROM t1 } {}

  #-----------------------------------------------------------------------
  do_execsql_test $tn.2.0 {
    CREATE TABLE t2(x, y, z, PRIMARY KEY(x)) %WR%;
  }
  do_execsql_test -db db2 $tn.2.1 {
    CREATE TABLE t2(x, y, PRIMARY KEY(x)) %WR%;
  }
  do_test $tn.2.2 {
    db cache flush
    set ::log {}
    do_then_apply_sql { INSERT INTO t2 VALUES(1, 2, 3) }
    set ::log
  } [list SQLITE_SCHEMA \
    {sqlite3changeset_apply(): table t2 has 2 columns, expected 3 or more}
  ]
  do_execsql_test $tn.2.3 { SELECT * FROM t2 } {1 2 3}
  do_execsql_test -db db2 $tn.2.4 { SELECT * FROM t2 } {}

  #-----------------------------------------------------------------------
  do_execsql_test $tn.3.0 {
    CREATE TABLE t3(a, b, PRIMARY KEY(b)) %WR%;
  }
  do_execsql_test -db db2 $tn.3.1 {
    CREATE TABLE t3(a, b, c DEFAULT 'D', PRIMARY KEY(b)) %WR%;
  }
  do_test $tn.3.2 {
    do_then_apply_sql -ignorenoop {
      INSERT INTO t3 VALUES(1, 2);
      INSERT INTO t3 VALUES(3, 4);
      INSERT INTO t3 VALUES(5, 6);
    };
    db2 eval {SELECT * FROM t3}
  } {1 2 D 3 4 D 5 6 D}
  do_test $tn.3.3 {
    do_then_apply_sql -ignorenoop {
      UPDATE t3 SET a=45 WHERE b=4;
      DELETE FROM t3 WHERE a=5;
    };
    db2 eval {SELECT * FROM t3}
  } {1 2 D 45 4 D}

  #-----------------------------------------------------------------------
  # 4.1: INSERT statements
  # 4.2: DELETE statements
  # 4.3: UPDATE statements
  #  
  do_execsql_test $tn.4.1.0 {
    CREATE TABLE t4(x INTEGER PRIMARY KEY, y) %WR%;
  }
  do_execsql_test -db db2 $tn.4.1.1 {
    CREATE TABLE t4(x INTEGER PRIMARY KEY, y, z) %WR%;
    INSERT INTO t4 VALUES(1, 2, 3);
    INSERT INTO t4 VALUES(4, 5, 6);
  }
  do_conflict_test $tn.4.1.2 -tables t4 -sql {
    INSERT INTO t4 VALUES(10, 20);
    INSERT INTO t4 VALUES(4, 11);
  } -conflicts {
    {INSERT t4 CONFLICT {i 4 i 11} {i 4 i 5}}
  }
  do_execsql_test -db db2 $tn.4.1.3 {
    SELECT * FROM t4 ORDER BY x
  } {1 2 3 4 5 6 10 20 {}}
  do_conflict_test $tn.4.1.4 -policy REPLACE -tables t4 -sql {
    INSERT INTO t4 VALUES(1, 11);
  } -conflicts {
    {INSERT t4 CONFLICT {i 1 i 11} {i 1 i 2}}
  }
  do_execsql_test -db db2 $tn.4.1.5 {
    SELECT * FROM t4 ORDER BY x
  } {1 11 {} 4 5 6 10 20 {}}

  do_execsql_test $tn.4.2.0 {
    DELETE FROM t4;
    INSERT INTO t4 VALUES(1, 'A');
    INSERT INTO t4 VALUES(2, 'B');
    INSERT INTO t4 VALUES(3, 'C');
    INSERT INTO t4 VALUES(4, 'D');
  }
  do_execsql_test -db db2 $tn.4.2.1 {
    DELETE FROM t4;
    INSERT INTO t4 VALUES(1, 'A', 'a');
    INSERT INTO t4 VALUES(3, 'C', 'c');
    INSERT INTO t4 VALUES(4, 'E', 'd');
  }
  do_conflict_test $tn.4.2.2 -tables t4 -sql {
    DELETE FROM t4 WHERE x=2;
    DELETE FROM t4 WHERE x=4;
  } -conflicts {
    {DELETE t4 NOTFOUND {i 2 t B}}
    {DELETE t4 DATA {i 4 t D} {i 4 t E}}
  }

  do_execsql_test $tn.4.3.0 {
    CREATE TABLE t5(a, b, c PRIMARY KEY) %WR%;
    INSERT INTO t5 VALUES(1,1,1), (2,2,2), (3,3,3), (4,4,4);
  }
  do_execsql_test -db db2 $tn.4.3.1 {
    CREATE TABLE t5(a, b, c PRIMARY KEY, d CHECK(b!=10)) %WR%;
    INSERT INTO t5 VALUES (2,2,2,2), (3,8,3,3), (4,4,4,4);
  }
  do_conflict_test $tn.4.3.2 -tables t5 -sql {
    UPDATE t5 SET a=4 WHERE c=1;
    UPDATE t5 SET b=9 WHERE c=3;
    UPDATE t5 SET b=10 WHERE c=2;
  } -conflicts {
    {UPDATE t5 NOTFOUND {i 1 {} {} i 1} {i 4 {} {} {} {}}}
    {UPDATE t5 DATA {{} {} i 3 i 3} {{} {} i 9 {} {}} {i 3 i 8 i 3}}
    {UPDATE t5 CONSTRAINT {{} {} i 2 i 2} {{} {} i 10 {} {}}}
  }
  
  #-----------------------------------------------------------------------
  do_execsql_test $tn.5.0 {
    CREATE TABLE t6(a, b, c, PRIMARY KEY(a, b)) %WR%;
  }
  do_execsql_test -db db2 $tn.5.1 {
    CREATE TABLE t6(a, b, c, d, e, PRIMARY KEY(a, b)) %WR%;
  }
  do_test $tn.5.2 {
    set c1 [sql_exec_changeset db {
      INSERT INTO t6 VALUES(1, 1, 1);
      INSERT INTO t6 VALUES(2, 2, 2);
    }]
    set c2 [sql_exec_changeset db2 {
      INSERT INTO t6 VALUES(3, 3, 3, 3, 3);
      INSERT INTO t6 VALUES(4, 4, 4, 4, 4);
    }]
    list [catch { sqlite3changeset_concat $c1 $c2} msg] $msg
  } {1 SQLITE_SCHEMA}

  #-----------------------------------------------------------------------
  db2 close
  sqlite3 db2 test.db
  do_execsql_test $tn.6.0 {
    CREATE TABLE t7(a INTEGER PRIMARY KEY, b) %WR%;
    INSERT INTO t7 VALUES(1, 1);
    INSERT INTO t7 VALUES(2, 2);
    INSERT INTO t7 VALUES(3, 3);
  }

  do_test $tn.6.1 {
    set c1 [sql_exec_changeset db {
      INSERT INTO t7 VALUES(4, 4);
      DELETE FROM t7 WHERE a=1;
      UPDATE t7 SET b=222 WHERE a=2;
    }]
    set cinv [sqlite3changeset_invert $c1]
    execsql { SELECT * FROM t7 }
  } {2 222 3 3 4 4}

  do_execsql_test -db db2 $tn.6.2 {
    ALTER TABLE t7 ADD COLUMN c DEFAULT 'ccc'
  }

  proc xConfict {args} { return "OMIT" }
  do_test $tn.6.3 {
    sqlite3changeset_apply db $cinv xConflict
    execsql { SELECT * FROM t7 }
  } {1 1 ccc 2 2 ccc 3 3 ccc}

  #-----------------------------------------------------------------------
  reset_test
  do_execsql_test $tn.7.0 {
    CREATE TABLE t8(a PRIMARY KEY, b, c);
  }
  do_execsql_test -db db2 $tn.7.1 {
    CREATE TABLE t8(a PRIMARY KEY, b, c, d DEFAULT 'D', e DEFAULT 'E');
  }

  do_then_apply_sql -ignorenoop {
    INSERT INTO t8 VALUES(1, 2, 3);
    INSERT INTO t8 VALUES(4, 5, 6);
  }
  do_execsql_test $tn.7.2.1 {
    SELECT * FROM t8
  } {1 2 3    4 5 6}
  do_execsql_test -db db2 $tn.7.2.2 {
    SELECT * FROM t8
  } {1 2 3 D E   4 5 6 D E}

  do_then_apply_sql -ignorenoop {
    UPDATE t8 SET c=45 WHERE a=4;
  }
  do_execsql_test $tn.7.3.1 {
    SELECT * FROM t8
  } {1 2 3    4 5 45}
  do_execsql_test -db db2 $tn.7.3.2 {
    SELECT * FROM t8
  } {1 2 3 D E   4 5 45 D E}

  #-----------------------------------------------------------------------
  reset_test
  do_execsql_test $tn.8.0 {
    CREATE TABLE t9(a PRIMARY KEY, b, c, d, e, f, g, h);
  }
  do_execsql_test -db db2 $tn.8.1 {
    CREATE TABLE t9(a PRIMARY KEY, b, c, d, e, f, g, h, i, j, k, l);
  }
  do_then_apply_sql -ignorenoop {
    INSERT INTO t9 VALUES(1, 2, 3, 4, 5, 6, 7, 8);
  }
  do_then_apply_sql {
    UPDATE t9 SET h=450 WHERE a=1
  }
  do_execsql_test -db db2 $tn.8.2 {
    SELECT * FROM t9
  } {1 2 3 4 5 6 7 450 {} {} {} {}}
  do_then_apply_sql -ignorenoop {
    UPDATE t9 SET h=NULL
  }
  do_execsql_test -db db2 $tn.8.2 {
    SELECT * FROM t9
  } {1 2 3 4 5 6 7 {} {} {} {} {}}
}]
}

catch { db close }
catch { db2 close }
sqlite3_shutdown
test_sqlite3_log

finish_test